MultiCon - Base and advanced device configuration videos

MultiCon devices are versatile controllers with a capability of measuring and data logging simultaneously.

Powerful and versatile data-loggers.

Multimedia

The following list includes useful, short films that will help the user to take the first steps with the MultiCon device. The list is divided into several thematic playlists to make it easier to find a specific topic.

FAQ
- MultiCon CMC FAQ - Reading 3x Pt100 signals and retransmitting its average to mA output
  This video shows how to calculate the average of several input measurements, and retransmit it to the 4÷20 mA output
- MultiCon CMC FAQ - SimCorder software, adding new or replacing existing device
  This video shows how to add new device, or replace existing in the SimCorder software
- MultiCon CMC FAQ – PWM duty cycle controlled relay
  This video shows how to configure MultiCon CMC to control a relay output basing on the PWM signal duty cycle.
- MultiCon CMC Application – Celsius degrees to Fahrenheit conversion
  This video shows how to convert Celsius degrees to Fahrenheit's
MultiCon CMC - Data viewing
- MultiCon CMC General Settings – Automatic view change
  This video shows how to configure automatic view change in MultiCon
- MultiCon CMC General Settings – Charts
  This video shows how to change chart's type and properties
- MultiCon CMC Groups – SCADALite - View linking
  This video shows how to configure view linking in SCADALite functionality
- MultiCon CMC General Settings – Types of views
  This video shows what are the available types of views in the MultiCon CMC
- MultiCon CMC Groups – 4ControllerView
  This video shows how to use the new controllers view functionality (4ControllerView) in the MultiCon CMC
MultiCon CMC - Basic knowledge
- MultiCon CMC Built-in inputs – Hardware input: resistance
  This video shows how to use the resistance hardware input on the UI4N4 and UI8N8 cards
- MultiCon CMC Logical channels – Logical channel hardware input mode
  This video shows how to set logical channel hardware input mode
- MultiCon CMC Ch. 7.4 Firmware update
  This video shows how to update firmware in MultiCon
- MultiCon CMC Files Management – Exporting configuration to flash drive
  This video shows how to save configuration file on flash drive.
- MultiCon CMC General Settings – Entering licence key
  This movie shows how to enter the license key to MultiCon.
- MultiCon CMC General Settings – Charts
  This video shows how to change chart's type and properties
- MultiCon CMC Files Management – Logged data - export to a flash drive
  This video shows how to export logged data to a flash drive
- MultiCon CMC DAQ Manager software
  This video shows the basics of using DAQ Manager software
- MultiCon CMC Built-in outputs – Relay triggering
  This video shows how to activate a relay based on a measured value
- MultiCon CMC General Settings – New trial licenses activation method
  This video shows how to activate a free 30-days trial licences in any MultiCon CMC
- MultiCon CMC Build-in webserver
  This video shows how does the build-in webserver work in the MultiCon CMC
- MultiCon CMC General Settings – Types of views
  This video shows what are the available types of views in the MultiCon CMC
- MultiCon CMC General Settings – Safe shutdown
  This video shows how to shut down a MultiCon safely
- MultiCon CMC General Settings – Available layouts from 1 to 6 channels simultaneously
  This video shows how the MuiltiCon CMC can show measurements regarding number of simultaneous readings on one screen
- MultiCon CMC Network settings
  This video describes all network settings available in MultiCon CMC
- MultiCon CMC Device information – Restoring default configuration
  This video shows how to restore default configuration (aka. factory settings) of the device
- MultiCon CMC Groups – First logging
  This video shows how to set the simplest logging in the MultiCon device
- MultiCon CMC Files management – Bundled configuration files
  This video shows how to use the new functionality of bundled configuration files.
- MultiCon CMC Groups – Logging trigger source
  This video shows how to trigger logging from both external binary signal and on-screen button
- MultiCon CMC Groups – 4ControllerView
  This video shows how to use the new controllers view functionality (4ControllerView) in the MultiCon CMC
- MultiCon CMC Device information – Changing language
  This video shows how to change the interface language in the MultiCon CMC device
- MultiCon CMC Logical channels – Time displaying
  This video shows how to configure logical channel in MultiCon to display time.
- MultiCon CMC Groups – Groups layouts and arrangement
  This video shows how to configure group layout
- MultiCon CMC Groups – Groups layouts part 2 – slots arrangement idea 1
  This video shows one of the possible group layouts arrangement
- MultiCon CMC Built-in inputs - 4 or 6 universal unisolated inputs modules
  This video shows what are the possibilities of EFUN4 or EFUN6 input modules
- MultiCon CMC Groups – Group layouts - part 3 - different indicators on one screen
  This video shows an exemplary way, how to put different type of indicators on one screen
- MultiCon CMC Application – Controlling relays through RS485, Modbus RTU
  This video shows how to control slave devie relay, while all are represented by single bit values in an 8 bits register
- MultiCon CMC Access options – password masking & logging files permissions
  This video shows the functionality of masking passwords and logging files permissions settings in the MultiCon CMC
MultiCon CMC - Math functions
- MultiCon CMC Logical channels – Logical channel in math function mode part #1
  This video shows how to set logical channel in math function mode - part #1
- MultiCon CMC Built-in outputs – Math function - relay triggering
  This video shows how to configure one relay, to react when at least one of many temperatures is above level.
- MultiCon CMC Application – Math function average of X with auto-reset
  This movie shows how to configure average of one logical channel which autoreset
- MultiCon CMC Application – Math function ignoring erroneous source
  This movie shows how to sum up two channels and ignore one channel if it's in error mode
- MultiCon CMC Logical channels – Math functions: XOR, OR, AND
  This movie shows how to use OR, AND and XOR logical functions
- MultiCon CMC Application – Simple timer (math function)
  This video shows how to make a simple timer using math function
- MultiCon CMC Logical channels – Flip-flop type: JK
  This video shows how to use JK type flip-flop
- MultiCon CMC Logical channels – Flip-flop type: RS
  This video shows how to use RS type flip-flop
- MultiCon CMC Application – Relay control besed on an average of multiple channels
  This video shows how to control relay depending on an average of multiple inputs
- MultiCon CMC Application – Thermal power meter
  This video shows how to set the CMC as a thermal power meter, with one flow and two temperature inputs
- MultiCon CMC Logical channels – Pulse counter based on a math function
  This video shows how to create a pulse counter based on a logical channels (no hardware counter)
- MultiCon CMC Application – One relay, several thresholds
  This video shows how to trigger one relay at different levels of several signals
- MultiCon CMC Application – Linear (y=ax+b) function calculation
  This video shows how to use linear scaling to calculate a linear functions input into output
- MultiCon CMC Logical channels – X selected by Y math function
  This video shows how to use X selected by Y math function
- MultiCon CMC Application – Celsius degrees to Fahrenheit conversion
  This video shows how to convert Celsius degrees to Fahrenheit's
- MultiCon CMC Application – Decimal fraction isolation using mathematical functions
  This video shows how to extract only the fraction part of the whole value
- MultiCon CMC Application – Selective mean calculation
  This video shows how to calculate a mean value of the channels in range
- MultiCon CMC Logical channels – Math function sum X[i]
  This video shows how to use math function "sum [X]"
- MultiCon CMC Application – Set point value controlled by UP and DOWN buttons (discrete system)
  This video shows how to control set point value using up and down buttons (step method)
- MultiCon CMC Application – Set point value controlled by UP and DOWN buttons (continous system)
  This video shows how to control set point value using up and down buttons (continuous method)
- MultiCon CMC Logical channels – Math function: derivative
  This video shows how to use the derivative mathematical function in the MultiCon CMC device
- MultiCon CMC Logical channels – Math function: maximal value out of multiple signals
  This video shows how to exclude maximum value out of multiple signals (logical channels)
- MultiCon CMC Logical channels – Max. of X reset by Y
  This video shows how to use channel in math function mode max. of X reset by Y
- MultiCon CMC Logical channels – Math function: minimum value out of multiple signals
  This video shows how to extract the minimum value out of multiple signals
- MultiCon CMC Application – Changing monostable switch into bistable
  This video shows how to change a monostable button into a bistable one
- MultiCon CMC Logical channels – Speed calculation based on a length measurement (CP2/4 module)
  This video shows how to calculate speed while having a length measurement (e.g. reading from counter input card CP2/4)
- MultiCon CMC Logical channels – Math function: integral
  This video shows how to use integral mathematical function
- MultiCon CMC Logical channels – Separating times into e.g. minutes & seconds
  This video shows how to separate units (minutes, seconds, etc.) from a times that is placed in one logical channel
- MultiCon CMC Access options – password masking & logging files permissions
  This video shows the functionality of masking passwords and logging files permissions settings in the MultiCon CMC
MultiCon CMC - Controllers
- MultiCon CMC Application – PID controller configuration
  This video shows how to configure PID controller
- MultiCon CMC Application – Change of Simex controller relay status via Modbus RTU
  This movie shows how to remotely control other device's relay using Modbus RTU
- MultiCon CMC Application – Relay control besed on an average of multiple channels
  This video shows how to control relay depending on an average of multiple inputs
- MultiCon CMC Application – Set point value controlled by UP and DOWN buttons (discrete system)
  This video shows how to control set point value using up and down buttons (step method)
- MultiCon CMC Application – Set point value controlled by UP and DOWN buttons (continous system)
  This video shows how to control set point value using up and down buttons (continuous method)
- MultiCon CMC Groups – 4ControllerView
  This video shows how to use the new controllers view functionality (4ControllerView) in the MultiCon CMC
- MultiCon CMC Controllers – PID controller with autotuning
  This video shows how to use built-in PID controller, including the auto-tuning function
- MultiCon CMC Application – Switching between manual and PID control
  This video shows how to create a button which will switch between automatic PID and manaul output control
- MultiCon CMC Application – Simple 2-state controller with set point and ON/OFF button
  This video shows how to configure a simple 2-state controller using the MultiCon CMC device
- MultiCon CMC FAQ – PWM duty cycle controlled relay
  This video shows how to configure MultiCon CMC to control a relay output basing on the PWM signal duty cycle.

Multimedia

Newsletter subscription

Communicate from the site